If you browse through the forums, blogs, how-to videos and books you will find a wealth of information on the above titled subject. And it's all conflicting. It's just about the most confusing subject you will encounter in
Revit. I will now add my voice to the many others. The method I'm proposing can be boiled down to a common point which is graphically represented in all files. You will then line everything else up based upon that.
The architect must set this up BEFORE anything is done in
Revit. No modelling, importing, linking, not anything.
Step 1. Set up the AutoCAD
AutoCAD survey drawings usually have 3D contours and 2D drafted information. The 2D stuff is at 0 Z elevation, the 3D is at it's actual height off of Sea Level. The 0,0,0 or Origin can be anywhere and sometimes it relates to something but sometimes not. We will be changing this.
Save as.
Give new name.
Move everything so the 0,0 is at the bottom left (don't adjust the Z). This could be at the property line intersection.
Make sure there is nothing outside of a 10 mile radius sphere from the 0,0,0. That means you will need to take a look in the Z.
Draw a circle on an individual layer at 0,0,0.
Rotate these to Project North. Make sure there is a North Arrow visible.
Break this file into two files, one with 2D plan info and the other with contours. You can use the
wblock command or
saveas.
Of course, you should audit and purge the
AutoCAD file as well.
Step 2. Not in Revit yet...
Get the longitude/latitude information relating to the
AutoCAD site file.
Open Google Earth and go to the address. Find the longitude/latitude of the corner of the site that corresponds with the 0,0, write it down.
The Google
Plugin also works great as well. It will import the location to
Revit's 0,0,0 as well as draw some Reference Planes and bring in a flat image. It will also give you the true north.
Step 3. Revit Architecture
Revit has a 10 mile diameter of where you can draw or even import. You cannot have anything outside of that.
Manage Place and Locations will assign the Longitude/Latitude numbers to your
Revit 0,0 (Origin)
Revit 0,0,0 is found by default at the centre of the elevation markers. It's also the default location of the Project Base Point and Survey Base Point. The
Revit origin can not be moved.
Make a view called
AutoCAD Site Plan.
Import the 2D
AutoCAD. Origin to Origin. Current View Only turned on. You cannot change
Revit's origin. The origin can be found at the nexus of the elevation markers in plan. This point is dead centre on your screen when you start from a standard
Revit Template.
Then Import the 3D
AutoCAD Contours, Origin to Origin. Current View Only turned off. You won't see this file yet, it's above your view.
Go to elevation, move the contours down to level 1.
Go to the site plan view.
Confirm that your Survey Base Point(triangle with an x) is at the centre of the circle you drew in
AutoCAD.
Click on the Project Base Point (a blue circle with an x). Click in the 'Angle to True North' and type the difference between your project north and the true north. You may have to type a negative in front of the degrees to get the expected results.
The Project Base Point and Survey Base Point will be in the same place. That's fine.
You may also want to draw two Reference Planes based on the centre of the
AutoCAD circle which is also the origin. Name them something logical.
Adjust your elevation markers and datums to focus on where your building will be.
Start drawing grids and modelling etc.
Step 4. Other Linked Revit Files...
Start your new
Revit Structure or
MEP file.Very first thing you do is link the
Revit Architecture file (which we just setup) Origin to Origin.
Check that the Z has come in correctly.
Adjust your elevation markers and datums to focus on where your building will be.
Draw Grids and Levels over top of the linked
Revit Architecture as needed.
Start drawing grids and modelling etc.
About Exporting back to CAD...
When exporting back to
AutoCAD the origins of both
AutoCAD and
Revit will line up as long as you have used the default location of the Project Base Point.
