Tuesday, March 01, 2011

Revit Design Adventures: Phasing and Demolition Plans (14)


 
The final renderings of the third iteration helped the client to decide on what will be their ultimate direction. Which brings us to the forth iteration which will be more of a focus on construction documents, including details.

You should know that introducing Phases into a project is adding a level of complexity. It's not just a matter of putting some lines on a 'demo' layer. The process of using phases in Revit will force you to think very specifically about the demolition and construction process. Phases need to be setup and maintained right from the beginning of a project and throughout. By default everything is put onto the 'New' Construction' phase which we will discuss later.
In the case of our kitchen project there are only about ten things that need to be demolished. We started by identifying how many phases there would be and roughly what would be on them. You will need to go into the 'Manage-Phases' dialog box. Never use the 'New Construction' phase as this name creates all sorts of confusing scenarios if more Phases need to be added (think New, Newer, Newest...). You can simply combine the New Construction phase with another that you create. I propose simply naming them Phase 1,2,3 etc.
Now for the views. This is where you will spend most of your time with Phases. You will need to Duplicate (with Detailing) most of your main views and change the View Properties, Phase and Phase Filter to show the desired effect. Remember to name them with the Phase indicated. Having sheets set up early with the 'Phase views' on them can help streamline the process.

Of course, the Phasing property of the elements of the model needs to be defined. You do this by editing the 'Phase Created and Phase Demolished' properties.
Next, we want to start the detailing process...

Previous Post in Series: Revit Design Adventures: Pesky Stock Families (13)
Next Post in Series: Revit Design Adventures: Detailing in Revit (15)

No comments:

Post a Comment