Friday, December 14, 2012

Elevation Marker Showing on Level Above

An Elevation Mark will show up in every Level that is shown in the Elevation View. You need to be careful of this because it may not be your intention to show the Elevation Mark (Bubble) in every view. The image below is showing an interior elevation on the right which includes just a small sliver of the Level above (Level 2) which means that the Elevation Mark is showing on Level 1 AND Level 2. Should the Elevation Crop Region have to cross the Cut Line instead of the Level to display? I think so.



Lights in GWB Ceiling not working

Seems that the default GWB Ceiling is not allowing lights to be copied or arrayed (unless you use the Radial Array). It gives the old 'Can't place inserts outside of hosts. These elements won't be copied.' message. It's weird because when you turn the ceiling into an ACT type, the lights can be copied and arrayed fine. After this you can turn the ceiling back into a GWB and there is no error message.

Tuesday, December 04, 2012

Visibility Options THE LIST

How many ways are there to display or not display stuff in Revit? Lots. Let's review a few and then discuss Parts Visibility.

Here's a list to get us started:

Visibility Graphics
Worksets
Filters
Mass Object Visibility
Temporary Hide/Isolate
Phases
Design Options
View Range
Discipline
Scope Box
Crop Region
Depth Clipping

And then there is Parts Visibility. You can divide a wall up into Parts for various reasons and then depending on the 'Parts Visibility' setting you see the original geometry or the parts. Here a picture of it...


Here's more to add to this (posted here by Dave Jones):

Checklist: 33 steps to being able to 'find stuff'
Check to see if:
1. The object or category is temporarily hidden
2. The object or category is hidden in the view
3. The object is being obscured by another element
4. The object's category or subcategory is hidden in the view
5. The object is outside the view's view range
6. The view's far clip depth is not sufficient to show the object
7. The object resides on a work set that is not loaded within the project
8. The object resides on a work set that is not visible in the view
9. The object resides on a work set that is not loaded in a linked file
10. The object resides on a work set that is not visible in a linked file
11. The object resides within a group (detail model) and it has been excluded from the group
12. The object is part of a design option that is not visible in the view
13. The object is part of a linked file that is not visible in the view
14. The object has one or more of its edges overridden to display as ''
15. The object is a family and none of its geometry is set to be visible in the view type
16. The object is a family and none of its geometry is set to be visible at the view's detail level
17. The object is set to not be visible at the category's detail level
18. The element has been placed outside the view's crop region (visible extents)
19. The element is an annotation object and does not reside entirely within the annotation crop region
20. The object's phase settings or the view's phase settings prevent the object from displaying in the view
21. The view's discipline is prohibiting the visibility of the object
22. The object is affected by a filter applied to the view
23. The object is subject to an element override, set to background color
24. The object is subject to a category override, set to background color
25. The object style is set to background color
26. The object is constrained to a scope boxes that is not visible in the view
27. The extents of the object itself don't permit it to be seen
28. The object is a mass, and 'Show Mass' is turned off
29. The object's host view has been deleted (area boundaries)
30. The view's scale is prohibiting the object's visibility
31. The object is a linked instance with coordinates too great for Revit to handle
32. The user has incorrectly identified the link instance to which the element belongs
33. The object is in a link that is not in its correct position
34. Wall is subsumed by automatically-embedded curtain wall
35. Something is really far away from the middle of the project and when the view is zoomed to fit, everything disappears
36. Element is white and its edges coincide with other objects. E.g., GWB ceiling in RCP.
38 check your crop regions extents, chances are that a very small portion of the object is outside your Plan Region and causing the whole element to not show up.